platform/Untitled

{
  // The name of the Zed theme to use for the UI.
  //
  // `mode` is one of:
  // - "system": Use the theme that corresponds to the system's appearance
  // - "light": Use the theme indicated by the "light" field
  // - "dark": Use the theme indicated by the "dark" field
  "theme": {
    "mode": "system",
    "light": "One Light",
    "dark": "One Dark"
  },
  // The name of a base set of key bindings to use.
  // This setting can take four values, each named after another
  // text editor:
  //
  // 1. "VSCode"
  // 2. "JetBrains"
  // 3. "SublimeText"
  // 4. "Atom"
  "base_keymap": "VSCode",
  // Features that can be globally enabled or disabled
  "features": {
    // Which inline completion provider to use.
    "inline_completion_provider": "copilot"
  },
  // The name of a font to use for rendering text in the editor
  "buffer_font_family": "Zed Plex Mono",
  // Set the buffer text's font fallbacks, this will be merged with
  // the platform's default fallbacks.
  "buffer_font_fallbacks": [],
  // The OpenType features to enable for text in the editor.
  "buffer_font_features": {
    // Disable ligatures:
    // "calt": false
  },
  // The default font size for text in the editor
  "buffer_font_size": 15,
  // The weight of the editor font in standard CSS units from 100 to 900.
  "buffer_font_weight": 400,
  // Set the buffer's line height.
  // May take 3 values:
  //  1. Use a line height that's comfortable for reading (1.618)
  //         "buffer_line_height": "comfortable"
  //  2. Use a standard line height, (1.3)
  //         "buffer_line_height": "standard",
  //  3. Use a custom line height
  //         "buffer_line_height": {
  //           "custom": 2
  //         },
  "buffer_line_height": "comfortable",
  // The name of a font to use for rendering text in the UI
  // You can set this to ".SystemUIFont" to use the system font
  "ui_font_family": "Zed Plex Sans",
  // Set the UI's font fallbacks, this will be merged with the platform's
  // default font fallbacks.
  "ui_font_fallbacks": [],
  // The OpenType features to enable for text in the UI
  "ui_font_features": {
    // Disable ligatures:
    "calt": false
  },
  // The weight of the UI font in standard CSS units from 100 to 900.
  "ui_font_weight": 400,
  // The default font size for text in the UI
  "ui_font_size": 16,
  // The factor to grow the active pane by. Defaults to 1.0
  // which gives the same size as all other panes.
  "active_pane_magnification": 1.0,
  // Centered layout related settings.
  "centered_layout": {
    // The relative width of the left padding of the central pane from the
    // workspace when the centered layout is used.
    "left_padding": 0.2,
    // The relative width of the right padding of the central pane from the
    // workspace when the centered layout is used.
    "right_padding": 0.2
  },
  // The key to use for adding multiple cursors
  // Currently "alt" or "cmd_or_ctrl"  (also aliased as
  // "cmd" and "ctrl") are supported.
  "multi_cursor_modifier": "alt",
  // Whether to enable vim modes and key bindings.
  "vim_mode": false,
  // Whether to show the informational hover box when moving the mouse
  // over symbols in the editor.
  "hover_popover_enabled": true,
  // Whether to confirm before quitting Zed.
  "confirm_quit": false,
  // Whether to restore last closed project when fresh Zed instance is opened.
  "restore_on_startup": "last_session",
  // Size of the drop target in the editor.
  "drop_target_size": 0.2,
  // Whether the window should be closed when using 'close active item' on a window with no tabs.
  // May take 3 values:
  //  1. Use the current platform's convention
  //         "when_closing_with_no_tabs": "platform_default"
  //  2. Always close the window:
  //         "when_closing_with_no_tabs": "close_window",
  //  3. Never close the window
  //         "when_closing_with_no_tabs": "keep_window_open",
  "when_closing_with_no_tabs": "platform_default",
  // Whether to use the system provided dialogs for Open and Save As.
  // When set to false, Zed will use the built-in keyboard-first pickers.
  "use_system_path_prompts": true,
  // Whether the cursor blinks in the editor.
  "cursor_blink": true,
  // How to highlight the current line in the editor.
  //
  // 1. Don't highlight the current line:
  //    "none"
  // 2. Highlight the gutter area:
  //    "gutter"
  // 3. Highlight the editor area:
  //    "line"
  // 4. Highlight the full line (default):
  //    "all"
  "current_line_highlight": "all",
  // Whether to pop the completions menu while typing in an editor without
  // explicitly requesting it.
  "show_completions_on_input": true,
  // Whether to display inline and alongside documentation for items in the
  // completions menu
  "show_completion_documentation": true,
  // The debounce delay before re-querying the language server for completion
  // documentation when not included in original completion list.
  "completion_documentation_secondary_query_debounce": 300,
  // Show method signatures in the editor, when inside parentheses.
  "auto_signature_help": false,
  /// Whether to show the signature help after completion or a bracket pair inserted.
  /// If `auto_signature_help` is enabled, this setting will be treated as enabled also.
  "show_signature_help_after_edits": true,
  // Whether to show wrap guides (vertical rulers) in the editor.
  // Setting this to true will show a guide at the 'preferred_line_length' value
  // if softwrap is set to 'preferred_line_length', and will show any
  // additional guides as specified by the 'wrap_guides' setting.
  "show_wrap_guides": true,
  // Character counts at which to show wrap guides in the editor.
  "wrap_guides": [],
  // Hide the values of in variables from visual display in private files
  "redact_private_values": false,
  // The default number of lines to expand excerpts in the multibuffer by.
  "expand_excerpt_lines": 3,
  // Globs to match against file paths to determine if a file is private.
  "private_files": ["**/.env*", "**/*.pem", "**/*.key", "**/*.cert", "**/*.crt", "**/secrets.yml"],
  // Whether to use additional LSP queries to format (and amend) the code after
  // every "trigger" symbol input, defined by LSP server capabilities.
  "use_on_type_format": true,
  // Whether to automatically add matching closing characters when typing
  // opening parenthesis, bracket, brace, single or double quote characters.
  // For example, when you type (, Zed will add a closing ) at the correct position.
  "use_autoclose": true,
  // Whether to automatically surround selected text when typing opening parenthesis,
  // bracket, brace, single or double quote characters.
  // For example, when you select text and type (, Zed will surround the text with ().
  "use_auto_surround": true,
  // Controls how the editor handles the autoclosed characters.
  // When set to `false`(default), skipping over and auto-removing of the closing characters
  // happen only for auto-inserted characters.
  // Otherwise(when `true`), the closing characters are always skipped over and auto-removed
  // no matter how they were inserted.
  "always_treat_brackets_as_autoclosed": false,
  // Controls whether inline completions are shown immediately (true)
  // or manually by triggering `editor::ShowInlineCompletion` (false).
  "show_inline_completions": true,
  // Whether to show tabs and spaces in the editor.
  // This setting can take three values:
  //
  // 1. Draw tabs and spaces only for the selected text (default):
  //    "selection"
  // 2. Do not draw any tabs or spaces:
  //    "none"
  // 3. Draw all invisible symbols:
  //    "all"
  // 4. Draw whitespaces at boundaries only:
  //    "boundary"
  // For a whitespace to be on a boundary, any of the following conditions need to be met:
  // - It is a tab
  // - It is adjacent to an edge (start or end)
  // - It is adjacent to a whitespace (left or right)
  "show_whitespaces": "selection",
  // Settings related to calls in Zed
  "calls": {
    // Join calls with the microphone live by default
    "mute_on_join": false,
    // Share your project when you are the first to join a channel
    "share_on_join": false
  },
  // Toolbar related settings
  "toolbar": {
    // Whether to show breadcrumbs.
    "breadcrumbs": true,
    // Whether to show quick action buttons.
    "quick_actions": true,
    // Whether to show the Selections menu in the editor toolbar
    "selections_menu": true
  },
  // Scrollbar related settings
  "scrollbar": {
    // When to show the scrollbar in the editor.
    // This setting can take four values:
    //
    // 1. Show the scrollbar if there's important information or
    //    follow the system's configured behavior (default):
    //   "auto"
    // 2. Match the system's configured behavior:
    //    "system"
    // 3. Always show the scrollbar:
    //    "always"
    // 4. Never show the scrollbar:
    //    "never"
    "show": "auto",
    // Whether to show cursor positions in the scrollbar.
    "cursors": true,
    // Whether to show git diff indicators in the scrollbar.
    "git_diff": true,
    // Whether to show buffer search results in the scrollbar.
    "search_results": true,
    // Whether to show selected symbol occurrences in the scrollbar.
    "selected_symbol": true,
    // Whether to show diagnostic indicators in the scrollbar.
    "diagnostics": true
  },
  // What to do when multibuffer is double clicked in some of its excerpts
  // (parts of singleton buffers).
  // May take 2 values:
  //  1. Behave as a regular buffer and select the whole word (default).
  //         "double_click_in_multibuffer": "select"
  //  2. Open the excerpt clicked as a new buffer in the new tab.
  //         "double_click_in_multibuffer": "open",
  // For the case of "open", regular selection behavior can be achieved by holding `alt` when double clicking.
  "double_click_in_multibuffer": "select",
  "gutter": {
    // Whether to show line numbers in the gutter.
    "line_numbers": true,
    // Whether to show code action buttons in the gutter.
    "code_actions": true,
    // Whether to show runnables buttons in the gutter.
    "runnables": true,
    // Whether to show fold buttons in the gutter.
    "folds": true
  },
  "indent_guides": {
    /// Whether to show indent guides in the editor.
    "enabled": true,
    /// The width of the indent guides in pixels, between 1 and 10.
    "line_width": 1,
    /// The width of the active indent guide in pixels, between 1 and 10.
    "active_line_width": 1,
    /// Determines how indent guides are colored.
    /// This setting can take the following three values:
    ///
    /// 1. "disabled"
    /// 2. "fixed"
    /// 3. "indent_aware"
    "coloring": "fixed",
    /// Determines how indent guide backgrounds are colored.
    /// This setting can take the following two values:
    ///
    /// 1. "disabled"
    /// 2. "indent_aware"
    "background_coloring": "disabled"
  },
  // Whether the editor will scroll beyond the last line.
  "scroll_beyond_last_line": "one_page",
  // The number of lines to keep above/below the cursor when scrolling.
  "vertical_scroll_margin": 3,
  // Scroll sensitivity multiplier. This multiplier is applied
  // to both the horizontal and vertical delta values while scrolling.
  "scroll_sensitivity": 1.0,
  "relative_line_numbers": false,
  // If 'search_wrap' is disabled, search result do not wrap around the end of the file.
  "search_wrap": true,
  // When to populate a new search's query based on the text under the cursor.
  // This setting can take the following three values:
  //
  // 1. Always populate the search query with the word under the cursor (default).
  //    "always"
  // 2. Only populate the search query when there is text selected
  //    "selection"
  // 3. Never populate the search query
  //    "never"
  "seed_search_query_from_cursor": "always",
  // Inlay hint related settings
  "inlay_hints": {
    // Global switch to toggle hints on and off, switched off by default.
    "enabled": false,
    // Toggle certain types of hints on and off, all switched on by default.
    "show_type_hints": true,
    "show_parameter_hints": true,
    // Corresponds to null/None LSP hint type value.
    "show_other_hints": true,
    // Time to wait after editing the buffer, before requesting the hints,
    // set to 0 to disable debouncing.
    "edit_debounce_ms": 700,
    // Time to wait after scrolling the buffer, before requesting the hints,
    // set to 0 to disable debouncing.
    "scroll_debounce_ms": 50
  },
  "project_panel": {
    // Whether to show the project panel button in the status bar
    "button": true,
    // Default width of the project panel.
    "default_width": 240,
    // Where to dock the project panel. Can be 'left' or 'right'.
    "dock": "left",
    // Whether to show file icons in the project panel.
    "file_icons": true,
    // Whether to show folder icons or chevrons for directories in the project panel.
    "folder_icons": true,
    // Whether to show the git status in the project panel.
    "git_status": true,
    // Amount of indentation for nested items.
    "indent_size": 20,
    // Whether to reveal it in the project panel automatically,
    // when a corresponding project entry becomes active.
    // Gitignored entries are never auto revealed.
    "auto_reveal_entries": true,
    // Whether to fold directories automatically and show compact folders
    // (e.g. "a/b/c" ) when a directory has only one subdirectory inside.
    "auto_fold_dirs": true,
    /// Scrollbar-related settings
    "scrollbar": {
      /// When to show the scrollbar in the project panel.
      ///
      /// Default: always
      "show": "always"
    }
  },
  "outline_panel": {
    // Whether to show the outline panel button in the status bar
    "button": true,
    // Default width of the outline panel.
    "default_width": 300,
    // Where to dock the outline panel. Can be 'left' or 'right'.
    "dock": "left",
    // Whether to show file icons in the outline panel.
    "file_icons": true,
    // Whether to show folder icons or chevrons for directories in the outline panel.
    "folder_icons": true,
    // Whether to show the git status in the outline panel.
    "git_status": true,
    // Amount of indentation for nested items.
    "indent_size": 20,
    // Whether to reveal it in the outline panel automatically,
    // when a corresponding outline entry becomes active.
    // Gitignored entries are never auto revealed.
    "auto_reveal_entries": true,
    /// Whether to fold directories automatically
    /// when a directory has only one directory inside.
    "auto_fold_dirs": true
  },
  "collaboration_panel": {
    // Whether to show the collaboration panel button in the status bar.
    "button": true,
    // Where to dock the collaboration panel. Can be 'left' or 'right'.
    "dock": "left",
    // Default width of the collaboration panel.
    "default_width": 240
  },
  "chat_panel": {
    // Whether to show the chat panel button in the status bar.
    "button": true,
    // Where to the chat panel. Can be 'left' or 'right'.
    "dock": "right",
    // Default width of the chat panel.
    "default_width": 240
  },
  "message_editor": {
    // Whether to automatically replace emoji shortcodes with emoji characters.
    // For example: typing `:wave:` gets replaced with `👋`.
    "auto_replace_emoji_shortcode": true
  },
  "notification_panel": {
    // Whether to show the notification panel button in the status bar.
    "button": true,
    // Where to dock the notification panel. Can be 'left' or 'right'.
    "dock": "right",
    // Default width of the notification panel.
    "default_width": 380
  },
  "assistant": {
    // Version of this setting.
    "version": "2",
    // Whether the assistant is enabled.
    "enabled": true,
    // Whether to show the assistant panel button in the status bar.
    "button": true,
    // Where to dock the assistant panel. Can be 'left', 'right' or 'bottom'.
    "dock": "right",
    // Default width when the assistant is docked to the left or right.
    "default_width": 640,
    // Default height when the assistant is docked to the bottom.
    "default_height": 320,
    // The default model to use when creating new contexts.
    "default_model": {
      // The provider to use.
      "provider": "zed.dev",
      // The model to use.
      "model": "claude-3-5-sonnet"
    }
  },
  // The settings for slash commands.
  "slash_commands": {
    // Settings for the `/docs` slash command.
    "docs": {
      // Whether `/docs` is enabled.
      "enabled": false
    },
    // Settings for the `/project` slash command.
    "project": {
      // Whether `/project` is enabled.
      "enabled": false
    }
  },
  // Whether the screen sharing icon is shown in the os status bar.
  "show_call_status_icon": true,
  // Whether to use language servers to provide code intelligence.
  "enable_language_server": true,
  // Whether to perform linked edits of associated ranges, if the language server supports it.
  // For example, when editing opening <html> tag, the contents of the closing </html> tag will be edited as well.
  "linked_edits": true,
  // The list of language servers to use (or disable) for all languages.
  //
  // This is typically customized on a per-language basis.
  "language_servers": ["..."],
  // When to automatically save edited buffers. This setting can
  // take four values.
  //
  // 1. Never automatically save:
  //     "autosave": "off",
  // 2. Save when changing focus away from the Zed window:
  //     "autosave": "on_window_change",
  // 3. Save when changing focus away from a specific buffer:
  //     "autosave": "on_focus_change",
  // 4. Save when idle for a certain amount of time:
  //     "autosave": { "after_delay": {"milliseconds": 500} },
  "autosave": "off",
  // Settings related to the editor's tab bar.
  "tab_bar": {
    // Whether or not to show the tab bar in the editor
    "show": true,
    // Whether or not to show the navigation history buttons.
    "show_nav_history_buttons": true
  },
  // Settings related to the editor's tabs
  "tabs": {
    // Show git status colors in the editor tabs.
    "git_status": false,
    // Position of the close button on the editor tabs.
    "close_position": "right",
    // Whether to show the file icon for a tab.
    "file_icons": false
  },
  // Settings related to preview tabs.
  "preview_tabs": {
    // Whether preview tabs should be enabled.
    // Preview tabs allow you to open files in preview mode, where they close automatically
    // when you switch to another file unless you explicitly pin them.
    // This is useful for quickly viewing files without cluttering your workspace.
    "enabled": true,
    // Whether to open tabs in preview mode when selected from the file finder.
    "enable_preview_from_file_finder": false,
    // Whether a preview tab gets replaced when code navigation is used to navigate away from the tab.
    "enable_preview_from_code_navigation": false
  },
  // Whether or not to remove any trailing whitespace from lines of a buffer
  // before saving it.
  "remove_trailing_whitespace_on_save": true,
  // Whether to start a new line with a comment when a previous line is a comment as well.
  "extend_comment_on_newline": true,
  // Whether or not to ensure there's a single newline at the end of a buffer
  // when saving it.
  "ensure_final_newline_on_save": true,
  // Whether or not to perform a buffer format before saving
  //
  // Keep in mind, if the autosave with delay is enabled, format_on_save will be ignored
  "format_on_save": "on",
  // How to perform a buffer format. This setting can take 4 values:
  //
  // 1. Format code using the current language server:
  //     "formatter": "language_server"
  // 2. Format code using an external command:
  //     "formatter": {
  //       "external": {
  //         "command": "prettier",
  //         "arguments": ["--stdin-filepath", "{buffer_path}"]
  //       }
  //     }
  // 3. Format code using Zed's Prettier integration:
  //     "formatter": "prettier"
  // 4. Default. Format files using Zed's Prettier integration (if applicable),
  //    or falling back to formatting via language server:
  //     "formatter": "auto"
  "formatter": "auto",
  // How to soft-wrap long lines of text.
  // Possible values:
  //
  // 1. Do not soft wrap.
  //      "soft_wrap": "none",
  // 2. Prefer a single line generally, unless an overly long line is encountered.
  //      "soft_wrap": "prefer_line",
  // 3. Soft wrap lines that overflow the editor.
  //      "soft_wrap": "editor_width",
  // 4. Soft wrap lines at the preferred line length.
  //      "soft_wrap": "preferred_line_length",
  "soft_wrap": "prefer_line",
  // The column at which to soft-wrap lines, for buffers where soft-wrap
  // is enabled.
  "preferred_line_length": 80,
  // Whether to indent lines using tab characters, as opposed to multiple
  // spaces.
  "hard_tabs": false,
  // How many columns a tab should occupy.
  "tab_size": 4,
  // Control what info is collected by Zed.
  "telemetry": {
    // Send debug info like crash reports.
    "diagnostics": true,
    // Send anonymized usage data like what languages you're using Zed with.
    "metrics": true
  },
  // Automatically update Zed. This setting may be ignored on Linux if
  // installed through a package manager.
  "auto_update": true,
  // Diagnostics configuration.
  "diagnostics": {
    // Whether to show warnings or not by default.
    "include_warnings": true
  },
  // Add files or globs of files that will be excluded by Zed entirely:
  // they will be skipped during FS scan(s), file tree and file search
  // will lack the corresponding file entries.
  "file_scan_exclusions": [
    "**/.git",
    "**/.svn",
    "**/.hg",
    "**/CVS",
    "**/.DS_Store",
    "**/Thumbs.db",
    "**/.classpath",
    "**/.settings"
  ],
  // Git gutter behavior configuration.
  "git": {
    // Control whether the git gutter is shown. May take 2 values:
    // 1. Show the gutter
    //      "git_gutter": "tracked_files"
    // 2. Hide the gutter
    //      "git_gutter": "hide"
    "git_gutter": "tracked_files",
    // Control whether the git blame information is shown inline,
    // in the currently focused line.
    "inline_blame": {
      "enabled": true
      // Sets a delay after which the inline blame information is shown.
      // Delay is restarted with every cursor movement.
      // "delay_ms": 600
    }
  },
  // Configuration for how direnv configuration should be loaded. May take 2 values:
  // 1. Load direnv configuration through the shell hook, works for POSIX shells and fish.
  //      "load_direnv": "shell_hook"
  // 2. Load direnv configuration using `direnv export json` directly.
  //    This can help with some shells that otherwise would not detect
  //    the direnv environment, such as nushell or elvish.
  //      "load_direnv": "direct"
  "load_direnv": "shell_hook",
  "inline_completions": {
    // A list of globs representing files that inline completions should be disabled for.
    "disabled_globs": [".env"]
  },
  // Settings specific to journaling
  "journal": {
    // The path of the directory where journal entries are stored
    "path": "~",
    // What format to display the hours in
    // May take 2 values:
    // 1. hour12
    // 2. hour24
    "hour_format": "hour12"
  },
  // Settings specific to the terminal
  "terminal": {
    // What shell to use when opening a terminal. May take 3 values:
    // 1. Use the system's default terminal configuration in /etc/passwd
    //      "shell": "system"
    // 2. A program:
    //      "shell": {
    //        "program": "sh"
    //      }
    // 3. A program with arguments:
    //     "shell": {
    //         "with_arguments": {
    //           "program": "/bin/bash",
    //           "arguments": ["--login"]
    //         }
    //     }
    "shell": "system",
    // Where to dock terminals panel. Can be `left`, `right`, `bottom`.
    "dock": "bottom",
    // Default width when the terminal is docked to the left or right.
    "default_width": 640,
    // Default height when the terminal is docked to the bottom.
    "default_height": 320,
    // What working directory to use when launching the terminal.
    // May take 4 values:
    // 1. Use the current file's project directory.  Will Fallback to the
    //    first project directory strategy if unsuccessful
    //      "working_directory": "current_project_directory"
    // 2. Use the first project in this workspace's directory
    //      "working_directory": "first_project_directory"
    // 3. Always use this platform's home directory (if we can find it)
    //     "working_directory": "always_home"
    // 4. Always use a specific directory. This value will be shell expanded.
    //    If this path is not a valid directory the terminal will default to
    //    this platform's home directory  (if we can find it)
    //      "working_directory": {
    //        "always": {
    //          "directory": "~/zed/projects/"
    //        }
    //      }
    "working_directory": "current_project_directory",
    // Set the cursor blinking behavior in the terminal.
    // May take 3 values:
    //  1. Never blink the cursor, ignoring the terminal mode
    //         "blinking": "off",
    //  2. Default the cursor blink to off, but allow the terminal to
    //     set blinking
    //         "blinking": "terminal_controlled",
    //  3. Always blink the cursor, ignoring the terminal mode
    //         "blinking": "on",
    "blinking": "terminal_controlled",
    // Set whether Alternate Scroll mode (code: ?1007) is active by default.
    // Alternate Scroll mode converts mouse scroll events into up / down key
    // presses when in the alternate screen (e.g. when running applications
    // like vim or  less). The terminal can still set and unset this mode.
    // May take 2 values:
    //  1. Default alternate scroll mode to on
    //         "alternate_scroll": "on",
    //  2. Default alternate scroll mode to off
    //         "alternate_scroll": "off",
    "alternate_scroll": "off",
    // Set whether the option key behaves as the meta key.
    // May take 2 values:
    //  1. Rely on default platform handling of option key, on macOS
    //     this means generating certain unicode characters
    //         "option_to_meta": false,
    //  2. Make the option keys behave as a 'meta' key, e.g. for emacs
    //         "option_to_meta": true,
    "option_as_meta": true,
    // Whether or not selecting text in the terminal will automatically
    // copy to the system clipboard.
    "copy_on_select": false,
    // Whether to show the terminal button in the status bar
    "button": true,
    // Any key-value pairs added to this list will be added to the terminal's
    // environment. Use `:` to separate multiple values.
    "env": {
      // "KEY": "value1:value2"
    },
    // Set the terminal's line height.
    // May take 3 values:
    //  1. Use a line height that's comfortable for reading, 1.618
    //         "line_height": "comfortable"
    //  2. Use a standard line height, 1.3. This option is useful for TUIs,
    //      particularly if they use box characters
    //         "line_height": "standard",
    //  3. Use a custom line height.
    //         "line_height": {
    //           "custom": 2
    //         },
    "line_height": "comfortable",
    // Activate the python virtual environment, if one is found, in the
    // terminal's working directory (as resolved by the working_directory
    // setting). Set this to "off" to disable this behavior.
    "detect_venv": {
      "on": {
        // Default directories to search for virtual environments, relative
        // to the current working directory. We recommend overriding this
        // in your project's settings, rather than globally.
        "directories": [".env", "env", ".venv", "venv"],
        // Can also be `csh`, `fish`, and `nushell`
        "activate_script": "default"
      }
    },
    "toolbar": {
      // Whether to display the terminal title in its toolbar.
      "title": true
    }
    // Set the terminal's font size. If this option is not included,
    // the terminal will default to matching the buffer's font size.
    // "font_size": 15,
    // Set the terminal's font family. If this option is not included,
    // the terminal will default to matching the buffer's font family.
    // "font_family": "Zed Plex Mono",
    // Set the terminal's font fallbacks. If this option is not included,
    // the terminal will default to matching the buffer's font fallbacks.
    // This will be merged with the platform's default font fallbacks
    // "font_fallbacks": ["FiraCode Nerd Fonts"],
    // Sets the maximum number of lines in the terminal's scrollback buffer.
    // Default: 10_000, maximum: 100_000 (all bigger values set will be treated as 100_000), 0 disables the scrolling.
    // Existing terminals will not pick up this change until they are recreated.
    // "max_scroll_history_lines": 10000,
  },
  "code_actions_on_format": {},
  /// Settings related to running tasks.
  "tasks": {
    "variables": {}
  },
  // An object whose keys are language names, and whose values
  // are arrays of filenames or extensions of files that should
  // use those languages.
  //
  // For example, to treat files like `foo.notjs` as JavaScript,
  // and `Embargo.lock` as TOML:
  //
  // {
  //   "JavaScript": ["notjs"],
  //   "TOML": ["Embargo.lock"]
  // }
  //
  "file_types": {
    "JSON": ["flake.lock"],
    "JSONC": ["**/.zed/**/*.json", "**/zed/**/*.json", "**/Zed/**/*.json", "tsconfig.json"]
  },
  // The extensions that Zed should automatically install on startup.
  //
  // If you don't want any of these extensions, add this field to your settings
  // and change the value to `false`.
  "auto_install_extensions": {
    "html": true
  },
  // Different settings for specific languages.
  "languages": {
    "Astro": {
      "prettier": {
        "allowed": true,
        "plugins": ["prettier-plugin-astro"]
      }
    },
    "Blade": {
      "prettier": {
        "allowed": true
      }
    },
    "C": {
      "format_on_save": "off",
      "use_on_type_format": false
    },
    "C++": {
      "format_on_save": "off",
      "use_on_type_format": false
    },
    "CSS": {
      "prettier": {
        "allowed": true
      }
    },
    "Elixir": {
      "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
    },
    "Erlang": {
      "language_servers": ["erlang-ls", "!elp", "..."]
    },
    "Go": {
      "code_actions_on_format": {
        "source.organizeImports": true
      }
    },
    "GraphQL": {
      "prettier": {
        "allowed": true
      }
    },
    "HEEX": {
      "language_servers": ["elixir-ls", "!next-ls", "!lexical", "..."]
    },
    "HTML": {
      "prettier": {
        "allowed": true
      }
    },
    "Java": {
      "prettier": {
        "allowed": true,
        "plugins": ["prettier-plugin-java"]
      }
    },
    "JavaScript": {
      "language_servers": ["!typescript-language-server", "vtsls", "..."],
      "prettier": {
        "allowed": true
      }
    },
    "JSON": {
      "prettier": {
        "allowed": true
      }
    },
    "JSONC": {
      "prettier": {
        "allowed": true
      }
    },
    "Markdown": {
      "format_on_save": "off",
      "use_on_type_format": false,
      "prettier": {
        "allowed": true
      }
    },
    "PHP": {
      "language_servers": ["phpactor", "!intelephense", "..."],
      "prettier": {
        "allowed": true,
        "plugins": ["@prettier/plugin-php"],
        "parser": "php"
      }
    },
    "Ruby": {
      "language_servers": ["solargraph", "!ruby-lsp", "!rubocop", "..."]
    },
    "SCSS": {
      "prettier": {
        "allowed": true
      }
    },
    "SQL": {
      "prettier": {
        "allowed": true,
        "plugins": ["prettier-plugin-sql"]
      }
    },
    "Starlark": {
      "language_servers": ["starpls", "!buck2-lsp", "..."]
    },
    "Svelte": {
      "language_servers": ["svelte-language-server", "..."],
      "prettier": {
        "allowed": true,
        "plugins": ["prettier-plugin-svelte"]
      }
    },
    "TSX": {
      "language_servers": ["!typescript-language-server", "vtsls", "..."],
      "prettier": {
        "allowed": true
      }
    },
    "Twig": {
      "prettier": {
        "allowed": true
      }
    },
    "TypeScript": {
      "language_servers": ["!typescript-language-server", "vtsls", "..."],
      "prettier": {
        "allowed": true
      }
    },
    "Vue.js": {
      "language_servers": ["vue-language-server", "..."],
      "prettier": {
        "allowed": true
      }
    },
    "XML": {
      "prettier": {
        "allowed": true,
        "plugins": ["@prettier/plugin-xml"]
      }
    },
    "YAML": {
      "prettier": {
        "allowed": true
      }
    }
  },
  // Different settings for specific language models.
  "language_models": {
    "anthropic": {
      "version": "1",
      "api_url": "https://api.anthropic.com"
    },
    "google": {
      "api_url": "https://generativelanguage.googleapis.com"
    },
    "ollama": {
      "api_url": "http://localhost:11434"
    },
    "openai": {
      "version": "1",
      "api_url": "https://api.openai.com/v1"
    }
  },
  // Zed's Prettier integration settings.
  // Allows to enable/disable formatting with Prettier
  // and configure default Prettier, used when no project-level Prettier installation is found.
  "prettier": {
    // // Whether to consider prettier formatter or not when attempting to format a file.
    // "allowed": false,
    //
    // // Use regular Prettier json configuration.
    // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
    // // the project has no other Prettier installed.
    // "plugins": [],
    //
    // // Use regular Prettier json configuration.
    // // If Prettier is allowed, Zed will use this for its Prettier instance for any applicable file, if
    // // the project has no other Prettier installed.
    // "trailingComma": "es5",
    // "tabWidth": 4,
    // "semi": false,
    // "singleQuote": true
  },
  // LSP Specific settings.
  "lsp": {
    // Specify the LSP name as a key here.
    // "rust-analyzer": {
    //     // These initialization options are merged into Zed's defaults
    //     "initialization_options": {
    //         "check": {
    //             "command": "clippy" // rust-analyzer.check.command (default: "check")
    //         }
    //     }
    // }
  },
  // Jupyter settings
  "jupyter": {
    "enabled": true
    // Specify the language name as the key and the kernel name as the value.
    // "kernel_selections": {
    //    "python": "conda-base"
    //    "typescript": "deno"
    // }
  },
  // Vim settings
  "vim": {
    "use_system_clipboard": "always",
    "use_multiline_find": false,
    "use_smartcase_find": false,
    "custom_digraphs": {}
  },
  // The server to connect to. If the environment variable
  // ZED_SERVER_URL is set, it will override this setting.
  "server_url": "https://zed.dev",
  // Settings overrides to use when using Zed Preview.
  // Mostly useful for developers who are managing multiple instances of Zed.
  "preview": {
    // "theme": "Andromeda"
  },
  // Settings overrides to use when using Zed Nightly.
  // Mostly useful for developers who are managing multiple instances of Zed.
  "nightly": {
    // "theme": "Andromeda"
  },
  // Settings overrides to use when using Zed Stable.
  // Mostly useful for developers who are managing multiple instances of Zed.
  "stable": {
    // "theme": "Andromeda"
  },
  // Settings overrides to use when using Zed Dev.
  // Mostly useful for developers who are managing multiple instances of Zed.
  "dev": {
    // "theme": "Andromeda"
  },
  // Task-related settings.
  "task": {
    // Whether to show task status indicator in the status bar. Default: true
    "show_status_indicator": true
  },
  // Whether to show full labels in line indicator or short ones
  //
  // Values:
  //   - `short`: "2 s, 15 l, 32 c"
  //   - `long`: "2 selections, 15 lines, 32 characters"
  // Default: long
  "line_indicator_format": "long",
  // Set a proxy to use. The proxy protocol is specified by the URI scheme.
  //
  // Supported URI scheme: `http`, `https`, `socks4`, `socks4a`, `socks5`,
  // `socks5h`. `http` will be used when no scheme is specified.
  //
  // By default no proxy will be used, or Zed will try get proxy settings from
  // environment variables.
  //
  // Examples:
  //   - "proxy": "socks5://localhost:10808"
  //   - "proxy": "http://127.0.0.1:10809"
  "proxy": null,
  // Set to configure aliases for the command palette.
  // When typing a query which is a key of this object, the value will be used instead.
  //
  // Examples:
  // {
  //   "W": "workspace::Save"
  // }
  "command_aliases": {},
  // ssh_connections is an array of ssh connections.
  // By default this setting is null, which disables the direct ssh connection support.
  // You can configure these from `project: Open Remote` in the command palette.
  // Zed's ssh support will pull configuration from your ~/.ssh too.
  // Examples:
  // [
  //   {
  //     "host": "example-box",
  //     "projects": [
  //       {
  //         "paths": ["/home/user/code/zed"]
  //       }
  //     ]
  //   }
  // ]
  "ssh_connections": null,
  // Configures the Context Server Protocol binaries
  //
  // Examples:
  // {
  //   "id": "server-1",
  //   "executable": "/path",
  //   "args": ['arg1", "args2"]
  // }
  "experimental.context_servers": {
    "servers": []
  }
}